J640/J641 Quick Reference
Loading Ribbon
1. Open the printer.
2. Remove the old ribbon
cassette.
3. Slide a new ribbon
cassette onto the printhead
assembly.
Ribbon
Cassette
Printhead
Assembly
Loading Labels
1. Open the printer.
2. Grasp the handles to pull the
supply holders apart and
insert the roll of labels into
place between the supply
holders. The label roll
should unwind as shown.
Make sure the labels are
free to unwind.
Supply
Holder
3. Load labels in peel or
non-peel mode.
Label
Guide
Loading for peel mode
Feed the labels over the peel bar
and through the lower opening
in the label guide.
Lower
Opening
Upper
Opening
Loading for non-peel mode
Feed the labels through the upper
opening in the label guide.
SV60254 Rev. A 3/95
©1995 Pitney Bowes, Inc. All rights reserved.
|